Answering system
44
NOTES:
1. If you do not enter a valid remote access code, the system answers the call
automatically.
2. If you pause for more than four seconds during remote access, you hear a help
menu listing all features and commands. If there is no command for another 20
seconds, the call ends automatically.
3. If the memory is full, the answering system answers after 10 rings and
announces, "Memory is full. Enter the remote access code." Enter your remote
access code to access the messages and announcements.
4. When the answering system is turned off, the telephone answers after 10 rings,
and announces, “Please enter your remote access code.”
To Next Page
Loading...
