AT&T EL52365 - Page 23

21
The handset displays Enter number. Use the dialing keys to edit the number
when necessary.
Press or to move the cursor to the left or right.
Press on the handset to erase a digit.
Press and hold to erase all digits.
Press and hold to enter a three-second dialing pause (a P
appears).
4. Press to move on to the name.
5. The screen displays Enter name. Use the dialing keys to enter a name. Press a key
repeatedly until the desired character appears.
Press or to move the cursor to the left or right.
Press 0 to add a space.
Press to erase a character.
Press and hold to erase all characters.
6. Press to save the entry.
Delete a call block entry
Search for the desired call block entry (see Review call block list on page 20).
When the desired entry displays, press on the handset and the screen
shows the next entry. You cannot retrieve a deleted entry.
Block calls without number
You can use this feature to reject all incoming calls which are “out of area“ or with
numbers set to “Private“.
On a handset, press in idle mode.
Press or to scroll to Call block, then press .
Press or to scroll to Calls w/o num, then press .
Press or to choose Unblock or Block, then press .
Mute rings of blocked calls
An incoming call will ring once and then the system will check if the call should be
blocked. You can mute the first ring of blocked calls.
On a handset, press in idle mode.
Press 7464# on the handset.
Press or to choose First ring: On or First ring: Off, then press
to confirm.
3.
•
•
•
•
•
•
•
•
1.
2.
1.
2.
3.
4.
1.
2.
3.