25
Remote access
You can access the answering system remotely by dialing your home telephone number from
any touch-tone telephone. When the answering system answers, enter the 2-digit remote
access code (19, unless you have changed it; refer to Feature summary on page 9). New
messages are played automatically. Use the remote commands to control playback. There is
also a wallet card listing the remote commands at the back of the online user’s manual.
Remote access commands
Actions Remote command
Play all messages ................................................. 1
Play new messages .............................................. 2
Delete the message (during playback) ....... 3
Delete all old messages ..................................33
Repeat or go back ................................................ 4
Stop .............................................................................. 5
Actions Remote command
Help menu ............................................................ 5
Skip the message .................................................6
Record announcement ................................... 7
Turn system on or off ........................................0
End remote access call (or hang up) .........8
To Next Page
Loading...
