10
Making, answering and ending calls
Making a call
Press PHONE/FLASH or /SPEAKER and then dial a telephone
number, or predial by first dialing the number and then pressing
PHONE/FLASH or /SPEAKER. When entering the number
before pressing PHONE/FLASH or /SPEAKER, you can:
Press and hold REDIAL/PAUSE to insert a 3-second dialing pause
(a P appears).
Press MUTE/DELETE to erase a digit.
Press and hold OFF/CANCEL to return to idle mode.
The screen shows the elapsed time as you talk (in hours, minutes,
and seconds).
Answering a call
Press PHONE/FLASH, /SPEAKER, or any dialing key (0-9, or #).
Ending a call
Press OFF/CANCEL or put the handset in the telephone base or
charger to end the call.
Speakerphone
During a call, press /SPEAKER to switch between speakerphone
and normal handset use. Press OFF/CANCEL to hang up.
Temporary silencing
While the telephone is ringing, press OFF/CANCEL or MUTE/DELETE to silence the
ringer temporarily on that handset only. This turns off the ringer without disconnecting
the call. The next incoming call rings normally at the preset volume.
•
•
•
To Next Page
Loading...
