8
Getting started
Belt clip & optional headset
Install belt clip as shown below, if desired.
For handsfree headset conversations, use any industry standard
2.5 mm headset (purchased separately). For best results, use an
AT&T 2.5 mm headset. To purchase a headset, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada,
dial 1 (866) 288-4268.
Snap the belt
clip into the
notches on
both sides of
the handset.
Plug a 2.5 mm
headset into the
jack on the side of
the handset.
To release the belt clip
from the handset, press
on both flaps of the belt
clip (as shown).
Pull and unlock one
flap from the notch first
before detaching the
whole belt clip from
handset.
Lift the rubber
flap here.
Side of the
handset
To Next Page
Loading...
Need help?
General
