25
Change the Wi-Fi Password
You can use WEP (64- or 128-bit), WPA-PSK, WPA2-PSK, or WPA/WPA2 mixed mode security.
IMPORTANT Record your Wi-Fi password (also referred to as the Wi-Fi key or network security
key depending on your operating system).
➊ Open your browser, go to http://att.miliberate, then click Login.
➋ Enter the Admin Login password and then click Login.
➌ Click Settings on the Navigation panel and then select Hotspot Settings. The Hotspot
Settings > General window opens.
➍ Enter your new Wi-Fi password in the Wi-Fi Password (Key) eld. The password must be 8-63
ASCII characters.
➎ Click Save Changes. A conrmation message will display in the green bar near the top of the
page when the changes have been successfully saved. You will need to reconnect all Wi-Fi
devices using the new Wi-Fi password.
To Next Page
Loading...
