AT&T MiFi Liberate - Modem Status; HSPA Status; 4 G LTE Status

96
Modem Status
• IMEI — the International Mobile Equipment Identity (IMEI) for this device. This number does
not change when the SIM is changed.
• IMSI — the International Mobile Subscriber Identity (IMSI) is a unique identication
associated with all GSM, UMTS and LTE mobile subscribers. It is stored in the SIM and
changes if the SIM is changed.
• Wireless Number — the wireless telephone number for the MiFi Liberate. This number
changes if the SIM is changed.
• FW Version — the current version of rmware installed on the MiFi Liberate.
• SIM Status — indicates current status of the SIM card.
• ICCID — the unique identication number assigned to the SIM card. It does not display if
there is no SIM installed, or a SIM error condition exists.
HSPA Status
• Status — refers to 4G HSPA and all preceding technologies. The following states are
supported: disabled, not available, available.
• Technology — displays current technology in use for the GSM/WCDMA/HSPA network.
• Network ID — the name or ID of the GSM/WCDMA/HSPA network.
• Cell ID — identies the cell tower currently in use.
• RSSI — displays the RSSI measure of signal strength in decibels. This is always a negative
number, and higher absolute values indicate a stronger signal.
• Roaming — indicates if the current connection is a roaming connection.
4G LTE Status
• Status — displays current LTE network status. Possible status values are disabled, not
available, or available.
• Signal Strength — indicates the strength of the LTE signal. This is always a negative number,
and higher absolute values indicate a stronger signal.
• SINR — indicates the signal quality. Higher numbers indicate a better signal.
• Roaming — indicates if the current connection is a roaming connection.