7
By default, the telephone is set to use line 1 for making calls. When you
answer a call, the telephone automatically selects the ringing line.
Making, answering or ending a call
To make a call with the speakerphone:
Press SPEAKER to use the primary line.
-OR-
To override automatic line selection, press
SPEAKER , then press LINE 1 or LINE 2.
-OR-
If you choose SPEAKERPHONE in Choose
the preferred mode (see user’s manual),
press LINE 1 or LINE 2 directly to activate
the speakerphone.
Wait for a dial tone, then dial the telephone
number. The screen displays the elapsed
time as you talk (in hours, minutes and
seconds).
Press SPEAKER to hang up.
To make a call with the handset:
Lift the handset to use the primary line.
-OR-
Lift the handset, then press LINE 1 or LINE 2 to override automatic
line selection.
Wait for a dial tone, then dial the number.
Place the handset on the telephone base to hang up.
To make a call with the corded headset:
Make sure the corded headset is connected to the telephone base.
Press HEADSET on the telephone base to use the primary line.
-OR-
Press HEADSET, then press LINE 1 or LINE 2 to override automatic
line selection.
-OR-
If you chose HEADSET in Choose the preferred mode (see user’s manual),
press LINE 1 or LINE 2 directly to activate the headset.
Wait for a dial tone, then dial the number.
Press HEADSET to hang up.
1.
2.
3.
1.
2.
3.
1.
2.
3.
8:00 AM 1/11
8887227702
L1 0:00:08
Elapsed time
8:00 AM 1/11
8887227702
L1 0:00:08
Elapsed time
Basic operation