Getting started
Belt clip & optional headset
Installation
Snap the belt clip
into the notches
on both sides of
handset.
Removal
Pull and unlock one
flap from the notch first
before detaching the
whole belt clip from the
handset.
For handsfree telephone conversations, you can use any industry
standard 2.5 mm headset (purchased separately). For best
results, use an AT&T 2.5 mm headset. To purchase a headset,
visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada dial 1 (866) 288-4268.
Lift the rubber
flap here.
Side of handset
Plug a 2.5 mm headset
into the jack on the side
of handset (beneath the
small rubber flap).
11
To Next Page
Loading...
Need help?
General
