AT&T TL32100 - Create Directory Entries; To Create a New Directory Entry

37
Directory
Create directory entries
To create a new directory entry
Press MENU/SELECT in idle mode.
Press DIR or CID to scroll to >Directory, then press MENU/SELECT.
Press DIR or CID to scroll to >Add contact.
Press MENU/SELECT.
Enter the telephone number when prompted.
Copy a number from redial:
Press REDIAL/PAUSE.
Press DIR or CID or press REDIAL/PAUSE repeatedly to locate the
number to copy.
Press MENU/SELECT to copy the number.
-OR-
Use the dial pad keys to enter a number (up to 30 digits).
Press DIR or CID to move the cursor to the right or left.
Press and hold REDIAL/PAUSE to enter a three-second dialing pause
(a P appears).
Press MUTE/REMOVE to erase a digit.
Press and hold MUTE/REMOVE to erase all digits.
Press MENU/SELECT to save the number in the display.
Enter the name when prompted. Use the dial pad keys and refer to the
character chart (page 38) to enter a name (up to 15 characters). Each time
you press a key, the character on that key appears. Additional key presses
produce other characters on that key.
Press DIR or CID to move the cursor to the right or left.
Press 0 to add a space.
Press MUTE/REMOVE to erase a character.
Press and hold MUTE/REMOVE to erase all characters.
1.
2.
3.
4.
5.
•
a.
b.
c.
•
–
–
–
–
6.
7.
•
•
•
•
Enter number
888-883-2445_
Enter name
Charlie Johnson_