57
Answering system
Message window displays
The message window on the telephone base displays the total number of
messages. See the table below for other message window displays.
0 There are no messages in the answering system.
0
(flashing)
After a power failure, the number in the message window flashes
to indicate the date and time need to be set.
0-6 Telephone base ringer volume while adjusting.
1-8 Speaker volume level of the telephone base while adjusting.
1-99
Total number of messages and memos.
Current message number during old message playback.
•
•
1-99
(flashing)
Total number of new messages and memos. The number flashes
when there are new messages that have not been reviewed.
Current message number during new message playback.
After a power failure, the number in the message window
flashes to indicate the date and time need to be set.
•
•
•
1-99 and F
(alternating)
Memory is full. Messages must be deleted before new messages
can be recorded.
SL Message is playing back slowly.
--
The answering system is being programmed by a system
handset.
The answering system is deleting all old messages.
The answering system is answering a call or recording a
memo or announcement.
The answering system is being accessed remotely.
•
•
•
•
To Next Page
Loading...
