Getting started
Belt clip & optional headset
For handsfree telephone conversations, you can use any industry
standard 2.5 mm headset (purchased separately). For best
results, use an AT&T 2.5 mm headset. To purchase a headset,
visit our website www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Plug a 2.5 mm headset
into the jack on the side
of handset (beneath the
small plastic cover).
Lift the plastic
cover here.
Side of handset
To attach the belt clip:
Snap the belt clip into
the slots on both sides
of the handset, as
shown in the figure.
To remove the belt clip:
Gently lift either of the
belt clip tabs, shown in
the figure, outwards
to remove the belt clip
from the handset.
9
To Next Page
Loading...
Need help?
General
