Out of range OR no power at base appears on my cordless
handset.
Make sure that the telephone base is powered up.
Move the cordless handset closer to the telephone base. You
might have moved out of range.
Reset the telephone base. Unplug the electrical power. Wait for
15 seconds, then plug it back in. Allow up to one minute for the
cordless handset and telephone base to reset.
Other electronic products such as HAM radios and other DECT
phones, can cause interference with your cordless phone. Try
installing your phone as far away as possible from these types
of electronic devices.
The batteries do not hold a charge.
If the cordless handset is in the charger and the charge light
does not come on, refer to The charge light is off (page 21) in
this Troubleshooting guide.
Charge the battery in the cordless handset for at least 16 hours.
For optimum daily performance, return the cordless handset to
the charger when not in use.
If the battery is depleted, it may take approximately five minutes
to charge the handset before it shows Low battery. See page 8
for details.
You may need to purchase a new battery. Please refer to
Battery installation and charging (pages 6-7) in this user’s
manual.
•
•
•
•
•
•
•
•
Troubleshooting
Appendix
16
To Next Page
Loading...
Need help?
General
