Add and register handsets
Before using a new TL90077 handset, make sure it is registered
with an AT&T TL96457/TL96477/TL96487/TL96497/TL96547
telephone system (purchased separately). These telephone
systems can support up to 12 handsets.
The handset(s) provided with your telephone system are already
registered as HANDSET 1, and so forth. Additional handsets are
assigned numbers in the sequential order they are registered
(up to HANDSET 12). Each handset must be registered to the
telephone base before use.
Register a handset to your telephone base
Method 1:
1. Before you begin registration, make sure the handset is out of the
telephone base or charger and shows To register, see
user manual.
2. Put the handset you wish to register on the telephone base cradle.
Registration and deregistration
10
3. The handset shows Registering... Please wait. If the
registration is successful, both the handset and the telephone
base screens display HANDSET X Registered (HANDSET
represents the handset name, X represents the handset
number). Both the handset and the telephone base beep. The
handset is now registered with the telephone base.
For registration, put the handset on the
telephone base, not the handset charger.
To Next Page
Loading...
Need help?
General
