12
Installation options
Wall mount to tabletop installation
To change the telephone base from the wall mount position to tabletop
position, follow the steps below.
If the telephone line cord and power adapter cord are bundled, untie
them first.
Push the telephone base up to remove it from wall. Unplug the telephone
line cord (or DSL filter) from the wall. Unplug the power adapter from the
power outlet.
Gently pull the wall mount bracket to unlock it from wall mount orientation.
Swivel the wall mount bracket up to tabletop position and push it into the
telephone base until it clicks into place.
1.
2.
3.
4.
To Next Page
Loading...
Need help?
General
