AT&T TREK 2 HD - Using the Touch Screen

9GETTING STARTED
• Disable the GPS function when not in use. Most applications
using this function will periodically query the GPS satellites for
your current location; each query drains your battery.
Powering Your Tablet On/O
• Press and hold the Power key to power on your tablet.
• To turn it o, press and hold the Power key to open the
options menu. Tap Power o.
Note: If the tablet freezes or takes too long to respond, press and
hold the Power key for about 10 seconds to power the tablet o.
Press and hold the Power key to turn the tablet on again.
Setting Up Your Tablet for the First Time
To set up the tablet, follow the on-screen prompts when you rst
power on your tablet aer you purchase it or aer performing a
factory reset (see Settings – Personal – Backup & Reset).
1. Tap the language eld to select the language you want, and
then tap LET’S GO.
2. Follow the prompts to set up your Wi-Fi connection, Google
account, Google services, and other options.
Note: Users with low vision can tap Vision Settings on the initial
setup screen to customize accessibility features.
Locking/Unlocking the Screen and Keys
Your tablet allows you to quickly lock the screen and keys (put
the tablet into Sleep mode) when not in use and also to turn the
screen back on and unlock it when you need it.