AT&T TREK 2 HD - Changing Ringtone and Notification Sound; Turning System Sounds On;Off; Adjusting Volumes

17
Changing Ringtone and Notication Sound
You can customize the default phone ringtone and notication
sound.
1. From the home screen, tap Settings Sound.
2. Tap Phone ringtone or Default notication ringtone.
Note: If you have additional audio les saved in the internal
storage or the microSDXC card, tap the Music or Recording
tab at the top of the ringtone list.
3. Select the ringtone you want to use.
4. Tap OK.
Turning System Sounds On/O
1. From the home screen, tap Settings Sound Other
sounds.
2. Tap Screen locking sounds, Charging sounds, Touch sounds,
or Power up tone to toggle on or o.
Adjusting Volumes
1. From the home screen, tap Settings Sound.
2. Drag the sliders below Media volume, Alarm volume, Ring
volume, or Notication volume to adjust the volume for each
type of audio.
Note: You can adjust the media volume when a media application
is in use by pressing the Volume key. If no media application is
active, press the Volume key to adjust the ringtone volume (or
the earpiece volume during a call).
PERSONALIZING