AT&T Trek HD - Connecting to a Computer

37
To pair/connect your tablet with a Bluetooth device
To exchange data with another device, you need to turn
Bluetooth on and pair your tablet with the Bluetooth device
with which you want to exchange data.
• Turn on Bluetooth.
• Touch Available devices.
• Touch a Bluetooth device you want to be paired with in the
list.
• A dialog will popup, touch Pair to confirm.
• If the pairing is successful, your tablet connects to the
device.
To disconnect/unpair from a Bluetooth device
• Touch the Settings icon
beside the device you want to
unpair.
• Touch Unpair to confirm.
7.4 Connecting to a computer ..................
With a USB cable, you can transfer media files and other files
between microSD card/internal storage and computer.
Before using MTP or PTP you should firstly mark USB
debugging.
• To access this function, touch Settings\About, then touch
Build number 7 times. Now you may touch Settings\
Developer options\USB debugging.
To connect/disconnect your tablet to/from the computer:
• Use the USB cable that came with your tablet to connect
the tablet to a USB port on your computer. You will receive a
notification that the USB is connected.