AT&T TRIMLINE - Additional Installation Steps and Features; Set DIAL Mode Switch; Temporary Tone Dialing

I
Additional
Installation
Steps
and
Features
of the Signature
PRINCESS
1.
Set DIAL
mode
switch
Set the DIAL
mode
switch to TT
(Touch-Tone)
unless
you
have dial-pulse
(rotary)
service. If
you
have
dial-pulse
service set the DIAL
mode
switch to DP. Make
sure
you
choose the corect
dialing
method;
tone dialing
will not work if
you
have
dial-pulse service.
To switch
from
pulse
to tone
dialing
during a
call,
see
"Temporary
Tone
Dialing"
below.
Temporary
Tone
Dialing
Ifyou have
dial-pulse
service,
you
can change
from
pulse
to tone
dialing during a
call by
pressing
the
E
button. This
is useful
ifyou
need to
send tone signals for
access for
tele-
phone
banking
or long distance
services.
EXAMPLE:
1. With
switch set
to
DP
(dial-pulse),
dial a
number.
(You
will
hear
a series
of clicks
when
you press
each key.)
2. Press
and release
the
E
button;
all keys
pressed
after this will
send tone
signals.
3. After
you
hang up, the
phone
automatically
retums
to dial-pulse service.
DIAL mode
switch
(Bottom
of
set base)