AT&T TRIMLINE - Installation of the Leased Phone; How to Connect a Table Phone; Plug in Handset Cord

lnstalling
Your Leased Phone
All AT&T
leased telephones now have modular
cords
with
clip-in
plugs
at both ends, so
you
can
plug
them in
yourself.
Ifyour leased
phone
cannot
be unplugged from the telephone
outlet, we
will
send
you
a FREE kit to convert
your
phone
outlets
to
plug-in
(modular).
With modular outlets,
you
have the
choice to change
phones
any time
you
want, for
any
reason.
There
are 3 basic types of modular outlets
to connect
modular
phones.
They're easy to use-all
you
do
is
plug
in
your
line cord
(except
wall sets, which
plug
in
dfuectly).
WNN
r
How
to Connect a Table
Phone
If
you
have a modular clip-in
jack,
it's easy to
con-
nect the
telephone. Just
follow
the steps
beginning on
this
page.
If
you
do not have a modular clip-in
jack,
or
if
you
have a hard-wired telephone that cannot be
unplugged, see
"If
You Have an Older Outlet."
1. Plug
in handset cord
Plug the coiled handset cord into
the
telephone. Press
firmly until
you
hear the
plug
click into
place.
Plug
the
other end of the cord into the handset. Then
hang up.
TELEPHONE
HANDSET