Atari 1010 Service Manual

SECTION THREE
TESTING AND TROUBLESHOOTING
OVERVIEW
A composite list of the tools and equipment required for all of the procedures in this
At the beginning of each procedure the specific tools required for
those steps are listed. The Maintenance, Head Alignment Check, Motor Speed Check
and Read/Write Verify Test sections apply to both the 1010S and 1010C units, with
differences noted where it is appropriate. The disassembly/assembly
instructions, however, are divided into separate 1010S and 1010C descriptions.
section follows.
their
COMPOSITE TOOL AND EQUIPMENT REQUIREMENTS
1 Standard Tool Kit
1 Digital Voltmeter
1 Oscilloscope
1 Demagnetizing Tape or Tool
1 ATARI CPS Digital Test Tape (FD100220)
1 ATARI CPS 3KHz Test Tape (FD100221)
ATARI Diagnostic Test Tape (FD100008)
ATARI Blank Tape (FD100009)
ATARI 1010 Cassette Recorder Field Service Manual (FD100223)
Isopropyl Alcohol -
Tetrachloride Cleaning Fluid
Cotton Swabs
ATARI
Computer
Console
(supplied
with
computer
repair
kit)
ATARI
BASIC
cartridge
(supplied
with
computer
repair
kit)
2 Jumper leads (Minimum | foot in length)
ATARI 1010 Cassette Recorder 3-1

Atari 1010 Specifications

General

Brand	Atari
Model	1010
Category	Cassette Player
Language	English