Atari 400 - Page 208

the procedure appropriate for the type of pro-
gram you are using.
For a BASIC Program
STEP 1
Insert the BASIC cartridge into your computer. IF
YOU HAVE A MODEL 800 COMPUTER, use the
slot on
the left side of the computer. FOR MOD-
ELS 400 AND 800, insert the cartridges byopen-
ing the slot door, dropping in the cartridge, and
closing the slot door.
FOR THE MODEl 1200Xl,
the slotis on the left side of the computer. Simply
drop in the cartridge (there is no slot door).
STEP 2
Turn on the computer and your TV or monitor.
Set the TV/game switch box to the COMPUTER
setting, and tune
to the channel you normally
use with your Atari.
If you have a Model 1010 recorder, turn on the
recorder
also. (The Model 410 recorder does not
haVe an ON/OFF switch.)
STEP 3
When the READY message appears on the
screen, insert
your cassette program into the re-
corder.
If you were able to make a backup copy
of the program, insert the copy of the program;
otherwise, insert
the original program.
NOTE: If this is the first time you are using the
cassette, press FAST FORWARD on the recorder
206