Atari 400

CONNECTING THE COMPUTER
CONSOLE TO ELECTRICITY
STEP
1
Make sure the power switches on all of your
equipment are set to OFF.
STEP 2
Plug the AC power adapter for the system con-
sole
into a wall plug or outlet strip.
STEP 3
Plug the small plug on the end of its other cord
into the hole marked
POWER IN on the right
side
of the computer console. IOn the Atari 400,
the connector goes to a slot marked JACK.)
Now you ' re ready to turn the system on and get
to work lor play). In Chapter 3, we ' ll give you
some exercises to help you learn the keyboard.
If you have any problems, your Atari manual
contains a troubleshooting guide,
but the most
common problems are loose connectors.
24