Atari 400 - Page 30

STEP 4
Insert
the other wedge-shaped connector into
the wedge-shaped hole labeled PERIPHERAL on
your computer console. This hole is on the right
side of the 400 and 800 models and on the back
of the 1200XL.
HOOKING THE ATARl410 OR ATARll0l0
CASSETTE PROGRAM RECORDER 10
THE COMPUTER CONSOLE
STEP 1
Insert the wedge -shaped I/O (Input/Output)
plug on the end of the cord coming out of your
computer into the hole labeled PERIPHERAL on
your computer console. This hole is on the right
side of the 400 and 800 models and on the back
of the 1200XL model. (If you are also using a disk
drive,
plug the wedge -shaped connector on the
cassette program recorder
into the second I/O
hole
on the back of your disk drive.)
STEP 2
If you have an Atari 1010 cassette program re-
corder,
plug the second wedge-shaped con-
nector
into the back of the recorder.
28.