Atari 5200

3.
!
Setting Up
the
Console
1. Peel off
the protective
coating 2. Check the
channel selector
on the top
of the console
unit. switch at the
back left side
of
the
console to be
sure it
is set to the
•
position.
3. Set
your television
channel
selector
to
Channel 3. If
Channel 3
is broadcasting
in
your area, set the
television
channel selector
switch
to
Channel 2 and change
the
channel selector switch on
the
console unit
to
the
position.
4.
Plug
the Game
Cable on the
console
unit into
the TV
Antenna
Switch Box GAME
connector.