• ATARI® Flashback 2(TM) Classic Game Console unit with Instruction Manual
• Two Plug-in Joystick Controllers
• Power Supply
The ATARI® Flashback 2(TM) Classic Game Console comes with 40 built-in classic games. No game
cartridges are required. The game console does not utilize a cartridge slot.
1. Locate the A/V IN connectors on your TV, VCR, or DVD and then connect the plugs on the
supplied A/V cable to the corresponding (same color) connectors on your TV, VCR, or DVD.
2. Plug the power connector from the included Power Supply into the back of the console and then
carefully plug the Power Supply into a wall outlet.
3. Consult your TV , VCR, or DVD manufacturer’s instruction manual for details on how to select
INPUT or SOURCE to display the signal to your TV from the A/V cable you have connected to the
console.
NOTE: Connecting your console via a VCR or DVD may also require the additional step of pressing the
TV/VCR or TV/DVD button on your remote control to select the proper output to the TV screen.
Connecting the Joystick Controllers
For 1-Player Games: Connect a joystick controller to the left controller port.
For 2-Player Games: Connect a joystick controller to the left controller port for player one, and
connect another joystick controller to the right controller port for player two.
Game Console Specifications:
Power Input: 120v AC, 60 Hz,7W
Power Output: 9v DC, 200mA
Dimensions: 4.5”l x 2”w x 3”h
Controller Ports: 2
Hours Of Fun: Unlimited
4
To Next Page
Loading...
Need help?
General
