Atari Ultimate Fight Stick with Trackball

2
A: Unlock the cabinet
with the enclosed key.
Step 1: Connect the Atari Ultimate Fight Stick to Power, and to your TV.
(Optional Ethernet Internet Connection)
B: Open cabinet to access the HDMI
cable and the power adapter plug.
C: Plug one end of the HDMI cable
into the Raspberry Pi.
D: Run both the other end of the
HDMI cable and power cable
through the back of the cabinet.
Plug the HDMI into your TV
and power plug into an outlet.
E: If you would like to connect an
ethernet cable to the Raspberry Pi
for the internet connection here
is where you would plug it in.
Note: Remember to lock the cover
after closing it.
A B
C D
E