Features
Compact sealed cabinet nished in high-gloss blue with leather upholstered bae
ATC on-board active 250W ‘Amp Pack’ module
2nd order Linkwitz-Riley active crossovers
2 x class A/B MOSFET ampliers, 200W bass/mid & 50W high frequency
User adjustable Input Sensitivity & bass cut/lift controls
Matching subwoofer – C4 Sub Mk2 LE – available for extend bass response
Hand-built in England
6 year warranty
SCM20ASL LE
Specifications
Acoustic Bass/Mid driver 1 x 150mm/6”, SB75-150SL 8Ω High Frequency Driver 1 x 25mm/1”, SH25-76S 6Ω Low Frequency Cut-o
55Hz (-6dB, anechoic) High Frequency Cut-o 25kHz (-6dB) Crossover Point 2.2kHz MaxSPL 108dB continuous, 114dB peak (per pair,
IEC Weighted Pink Noise, 1m, anechoic) Sensitivity +4dBu rev 95dBC (Bass Boost 0dB, Input Sensitivity 1V, Pink noise).
Electronic Balanced Input 1 x Rear Panel Mounted Female XLR, pin 2 hot Input Sensitivity Control -6dB switchable, -6dB variable.
Total adjustment 2.2dBu/1Vrms to 14.2dBu/4Vrms Bass Shelf -2dB to +3dB, switchable in 1dB steps Amplier Type Grounded Source MOSFET,
class A/B, convection cooled Output Power Bass 200W (8Ω), H.F. 50W (8Ω).
Physical Dimensions HxWxD 450x250x425mm 17
11
/
16
” x 9
13
/
16
” x 14
3
/
16
” Weigh 2 7 k g s / 59. 5 l b s.
ATC reserve the right to change specications without prior notice
13
To Next Page
Loading...
