C4 SUB MK2 LE
Specifications
Acoustic Bass driver 1 x SS75-314SC 8Ω Low Frequency Cut-o 22Hz (-6dB, half space, low pass lter set at 80Hz) Low Pass Filters
50Hz, 65Hz, 80Hz, 320Hz. (-6dB, 4th order Linkwitz Riley) MaxSPL 110dB continuous, 116dB peak (IEC Weighted Pink Noise, measured at
1m, half space, low pass lter set at 80Hz) Sensitivity +4dBu ref. 88dBC (single channel driven, measured at 1m, Gain +6dB, Level 0dB, pink
noise, low pass lter set at 80Hz).
Electronic Amplier Type Grounded Source MOSFET based Class A-B, convection cooled Output Power 300W in to 8Ω Balanced
Inputs 2 x Rear Panel Mounted Female XLR, pin 2 hot Balanced Outputs 2 x Rear Panel Mounted Male XLR, pin 2 hot Gain Control
0, +6dB, +10dB Level Control 0dB -11dB in 1dB steps. Total range 21dB with use of Gain switch Phase Control 0-180° ref. Input Polarity
Control In-Phase/Out-of-Phase ref. Input.
Physical Dimensions HxWxD 568x464x559mm 22
3
/
8
” x 18
5
/
16
” x 22” Weigh 42kg / 92.6lbs.
ATC reserve the right to change specications without prior notice
14
Features
Sealed cabinet nished in high-gloss blue with leather upholstered bae
Proprietary
ATC sub-bass driver
On-board 300W MOSFET class A/B amplier
Adjustable gain, low pass frequency, polarity and phase settings
Compatible with stereo, home cinema and AV applications
Hand-built in England
6 year warranty
To Next Page
Loading...
