Booster will about 30 degrees Fahrenheit higher than the ambient
temperature, which is a normal phenomenon.
Step 1: Install the Booster
Install the Booster with built-in indoor antenna where you need the
greatest signal boost and place it in your desired location. Mount the
signal booster in a ventilated and dry place that is easily accessible
for maintenance (it should be located near a power outlet)
While choosing a location for the booster, please keep in mind that there
must be at least 20 ft of vertical separation between the outdoor antenna
and the booster with built-in indoor antenna.
NOTE: Do not connect booster to power until the system is fully installed.
3
sideview
tapping screw
Mounting booster with
built-in indoor antenna
on wall bracket
To Next Page
Loading...