Need help?Do you have a question about the ATEN KE6900ST and is the answer not in the manual?
Explains how to mount transmitters onto system racks or walls for convenience and flexibility.
Provides step-by-step instructions for attaching the mounting bracket to KE transmitters.
Guides through the simple cable connections for setting up KE6900/KE6940 in a point-to-point configuration.
Provides instructions for configuring network settings like IP address, subnet mask, and default gateway.
Guides the initial login process, including password change for security.
Details how to configure Receiver settings, including network and IP address settings.
Explains how to configure Transmitter settings via the Receiver's OSD page.
Provides instructions on how to download the KVM over IP Matrix Manager software from the ATEN website.
Details the step-by-step process for installing the full version of the KVM over IP Matrix Manager.
Explains how to access the KVM over IP Matrix Manager via a web browser and the initial login procedure.
Guides users through adding transmitters, receivers, and network switches to the CCKM.
Explains how to operate and configure KE Series devices via remote terminal sessions using RS-232 or Telnet.
Details the status overview of added transmitters, including active, standby, and offline counts.
Describes the status overview of added receivers, including active, standby, and offline counts.
Covers basic system settings such as KVM version, serial number, name, description, and language.
Details the process of upgrading firmware for online KE devices.
Provides procedures for backing up and restoring KVM over IP Matrix Manager configurations.
Guides on how to access the CCKM server using the ATEN Matrix Link app.
Guides on selecting access privileges and connecting transmitters to receivers or receiver groups.
Explains the Virtual Media feature for redirecting drives, folders, and smart card readers.
Guides through the process of running the Firmware Upgrade Package file and selecting devices.
Provides steps to recover the device if the firmware upgrade procedure fails or halts.
Explains how to log into KE Series devices via a Telnet session for configuration.
Provides the formula and values for controlling switch ports via CLI commands.
To Next Page
General
