WHAT DOES THE LED SAY?
The charger tells you what it’s up to, with an LED
light that changes colours.
NOTE
If you don’t see any light (when there is power in
your premises), press the Reset button on the PRCD
(Portable Residual Current Device). If it still doesn’t
respond, please contact customer support.
Using the Portable Charger plug in the 3-pin
connector of the charging cable into the 5A socket.
Solid amber light: Charger software is being
updated over the air.
Solid green light: When not connected to the
scooter, the charger is functional.
When connected to the scooter, charging is
complete.
Blinking green light: Charging in progress.
Solid red light: Fault in the charger. Please
contact customer support.
No light: No power.
Charge it up
35
To Next Page
Loading...
