Ather Duo - Page 2

THE SPECIFICATIONS
Operating voltage and
wiring
Frequency
Output
Operating temperature
Weight
Dimensions
1
A charger you can fix at your parking spot, or carry
along in your boot. This or that, charge the way you like.
1. Insert the plug into a 6A 3-pin socket.
2. Plug the charging connector into your Ather.
3. Always check, the charger vents should never be blocked
for a proper air flow.
4. The LED on the charger will start blinking, the moment
charging starts.
185 V AC - 275 V AC
single-phase
50 Hz
59 V 12 A
0
o
C - 45
o
C
2.6 kg
300mm x 135mm x 124mm
Ather Duo
HOW DOES IT WORK?