ATI Technologies 3D CHARGER - System Requirements; Specifications

XPERT™ 2000
XPERT™ 2000
Technical Information
System Requirements
Pentium
®
II/III
microprocessor-based, Celeron or compatible system
with Accelerated Graphics Port (AGP) slot.
AGP 1.0
compliant.
CD-ROM drive
required for software.
DVD drive
required for DVD playback. (Windows
®
95b, Windows
®
98)
Specifications
Operating System
Windows
®
95, Windows
®
98, Windows
®
NT 4.0
Memory Configuration
32 MB, non-upgradeable.
Sync Signals
Separate horizontal and vertical sync at TTL levels.
Video BIOS
AGP 1.0 compliant (AGP 2X compliant).
Video Output Connector
CRT monitor, 15-pin D shell (female),
IBM standard.
Display support
DDC1/2b/2b+ monitor support; VESA Display
Power Management support.
Video interrupt
IRQ 11 is requested, although the actual IRQ
number is automatically assigned by the Plug & Play system BIOS.
Power
+5V ±5% @ 0.4 A typical.
+3.3V ±5% @ 1.4 A typical.
+12V ±5% @ 0.3 A typical.