4
Note: If you use multiple monitors, the RADEON™ X300 card must
be the primary graphics card. Normally, the system BIOS determines
which graphics card will be the primary.
To connect your monitors
1
Power off your computer and monitors.
2
Plug the monitor cables into their appropriate connectors.
3
Power on your monitors first, and then restart your computer so that
Windows® can detect the new hardware settings.
Z
DVI-I Backplate Connection. To connect a flat panel, plug the
monitors DVI-I connector into the DVI-I connection.
X
DVI-I Backplate Connection. To connect a flat panel, plug the
monitors DVI-I connector into the DVI-I connection.
Y
DVI-I Backplate Connection. To connect a flat panel, plug the
monitors DVI-I connector into the DVI-I connection.
Connections and Adapters for the RADEON™ X300 Card
To Next Page
Loading...
