EasyManua.ls Logo

ATK BINDINGS RT 10 - Page 40

ATK BINDINGS RT 10
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WWW.ATKBINDINGS.COM | PROUDLY MADE IN ITALY SINCE 2007 40
WARNING! DANGER!
While releasing the binding, firmly hold the ski that is going to be release from the boot in order to
avoid an uncontrolled ski loss that would represent a great danger for the skier and/or third parties
which may be hit by the ski.
At the end of your ascent, carefully release the boot from the binding and immediately turn the ski
brake in braking mode (downhill mode) in order to reduce the risk of an uncontrolled ski loss.
Check that the front locking lever is in downhill skiing mode, as shown at PICTURE 23, and that the “SKI”
logo marked on the front lever is completely visible, as shown at PICTURE 23.1; if not like that, slightly
push on the front locking lever in order to obtain the proper position, as shown at PICTURE 23.
Press on the heel part of the binding in order to step in and to obtain the complete hooking of the boot,
as shown at PICTURE 24.
4.4| HOW TO GET OUT FROM THE BINDING
By the up-hill position, press on the front locking lever as show at PICTURE 25, moving it to the downhill
skiing position and proceed as follows.
PICTURE 24
PICTURE 23
PICTURE 23.1