EasyManua.ls Logo

ATK BINDINGS RT 10 - Page 41

ATK BINDINGS RT 10
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WWW.ATKBINDINGS.COM | PROUDLY MADE IN ITALY SINCE 2007 41
WARNING! DANGER!
Crampons must be used only with proper snow conditions; improper snow conditions could lead to
heavy damages to the material and create a greater danger for the user or third parties.
Do not force the crampon when not properly placed into its seat.
By the downhill skiing position, press again the front locking lever as shown at PICTURE 26, in order to fully
open the toe part and release the boot.
Lift and rotate the foot tip moving the boot forward in order to get out from the heel part of the binding, as
shown at PICTURE 27.
4.5| HOW TO USE THE ATK® CRAMPONS
Place the crampon at 90° and slip it into the proper seat of the CRAMPONS SLOT, as shown at PICTURE 28.
Once having correctly placed the crampon in its seat, release the crampon in order to obtain the position
shown at PICTURE 29.
Manually test the lateral stabilization of the crampon and the free rotation of the same on its pivot, as
shown at PICTURE 29.
PICTURE 25
PICTURE 27
PICTURE 26