To Next PageTo Next Page
Need help?Do you have a question about the Atlantic 3410538311078 and is the answer not in the manual?
Instructions for safe operation, including child safety, surface temperature, and installation.
Recommendations for placing the device in residential premises and avoiding drafts.
Step-by-step guide on mounting the device, marking holes, drilling, and securing it to the wall.
Details on connecting the device to a 230V, 50Hz power supply and pilot wire connections.
Enables quickly raising room temperature, operating at maximum power for 2 hours.
Repeats 2h Boost daily, operating at maximum power for 2 hours each day.
Heats and dries towels daily, set for moderate heat during mid-season.
Prevents inadvertent manipulation of settings by locking selected heating mode.
Steps to switch on the device and set the desired room temperature using the control wheel.
Guide to activating the 2h Boost function for rapid temperature increase.
Instructions for activating the 24h Auto heating function for daily comfort.
How to activate the 2h Boost function manually when 24h Auto is active.
Procedure to switch off the 24h Auto heating function.
Guide to activating the 24h Auto Drying function for warming and drying towels.
How to manually activate the 24h Auto Drying function outside programmed times.
Procedure to switch off the 24h Auto Drying function.
How to activate and deactivate the control locking function to prevent accidental changes.
Steps to deactivate the control locking function.
Procedure to adjust the displayed temperature to match actual room temperature.
How to set the device to Frost-free mode (7°C) via temperature calibration.
Checks to perform if the device fails to heat, including circuit breakers and sensor issues.
Troubleshooting steps if the device heats constantly, checking drafts and lock settings.
Diagnosing issues when the indicator light B flashes, often related to locked controls or mode settings.
Checking if the device surface is too hot, considering room output and drafts.
Explanation for why top and bottom elements might be less hot due to design.
Troubleshooting why the 24h Auto mode may not repeat daily, checking power and mode settings.
Ensuring correct programmer usage and checking if the device follows instructions.
Checking for power interruptions or time changes affecting 24h Auto mode start times.
General
