Package Contents
1 x Bridge 1 x Power Supply 1 x Ethernet Cable 1 x manual
Product Description
The LED indicates the operating mode of the bridge:
- Green light: established internet connection
- Red light: no internet connection
- Flashing LED (green, orange or red): connection in progress
PROG and RESET buttons have no action for the moment in Cozytouch App.
Requirements for installation
You must have an internet connection, DSL box equipped with an Ethernet port. Place the
bridge at a minimum distance of 30 cm from the internet modem. Do not place the bridge
on a metal surface.
Installation
Connect the bridge to your DSL box, by plugging the Ethernet cable on the Ethernet
connector represented by the logo .
Connect the included power supply to the connector represented by the logo . The
converter is useless for some countries; USB can be directly connected to an internet box for
the electric supply.
Then the LED will light up by changing color for a few tens of seconds and finally will stay
green.
PROG button
RESET button
RJ45 Ethernet
Supply
LED
To Next Page
Loading...
