This document provides assembly instructions for the Atlantic Oxford Headboard, an Open Bed Frame, and a Trundle Bed, all designed for Twin, Full, or Queen sizes, with some components specifically for Twin XL. The instructions emphasize careful reading and familiarization with parts before assembly.
Oxford Headboard
Function Description:
The Oxford Headboard is designed to be attached to an existing bed frame, either a wood bed frame or a metal bed frame. It consists of multiple headboard panel boards that are assembled with legs to form the complete headboard unit.
Important Technical Specifications:
- Parts List:
- Headboard Panel Boards: 4 pieces
- Left Leg: 1 piece
- Right Leg: 1 piece
- Hardware:
- JCB M6 x 35mm (A): 16 pieces (plus 1 spare) - for attaching legs to headboard panels.
- JCB M8 x 15mm (5/8") (B): 4 pieces - for attaching the headboard to an open bed frame.
- Allen wrench (C): 1 piece (plus 1 spare) - for tightening M6 and M8 bolts.
- JCB M6 x 25mm (1") (D): 4 pieces (plus 1 spare) - for attaching to a metal bed frame.
- Flat washer (E): 4 pieces (plus 1 spare) - for attaching to a metal bed frame.
- Split washer (F): 4 pieces (plus 1 spare) - for attaching to a metal bed frame.
- Compatibility: Instructions apply to Twin bed sizes for the headboard assembly itself. For attaching to a metal bed frame, it's compatible with Twin, Full, and Queen sizes.
- Material: Wood headboard.
Usage Features:
- Assembly:
- Step 1 (Headboard Assembly): Attach the left and right legs (2 and 3) to the headboard panel boards (1) using JCB M6 x 35mm bolts (A) and tighten with the Allen wrench (C). This forms the main headboard unit.
- Attaching to Wood Bed Frame: Follow the assembly instructions included with your specific wood bed frame.
- Attaching to Metal Bed Frame: If attaching the wood headboard to a metal bed frame (sold separately), use JCB M6 x 1" bolts (D), flat washers (E), and split washers (F). Tighten with the Allen wrench (C). The metal bed frame comes with its own assembly instructions and hardware.
- Adult Assembly: Indicated by an icon, suggesting that assembly should be performed by an adult.
Maintenance Features:
- Spare Hardware: The manufacturer includes spare hardware in case damage occurs during assembly.
- Customer Support: In case of damaged or defective items, contact Atlantic Furniture customer service at customerservice@atlanticfurniture.com or 1-800-955-3726.
- Periodic Checks: For lasting safety, it is recommended to periodically check that all screws are tight and all parts are secure.
Open Bed Frame
Function Description:
The Open Bed Frame is a standalone bed frame designed to support a mattress and can be attached to a headboard. It consists of a foot rail, legs, side rails, and slat kits.
Important Technical Specifications:
- Parts List:
- Foot Rail: 1 piece
- Left Leg: 1 piece
- Right Leg: 1 piece
- Side Rail: 2 pieces
- Slat Kit: 2 sets
- Hardware:
- JCB M6 x 110mm (4 3/8") (A): 2 pieces (plus 1 spare) - for attaching legs to the foot rail.
- Barrel nut (B): 2 pieces - used with JCB M6 x 110mm bolts.
- JCB M8 x 15mm (5/8") (C): 4 pieces - for attaching side rails to the foot rail and the bed frame to the headboard.
- Wood screw (1 1/4") (D): 24 pieces (plus 2 spares) - for attaching slat kits.
- Allen wrench M6 (E): 1 piece - for tightening M8 bolts.
- Allen wrench M4 (F): 1 piece (plus 1 spare) - for tightening M6 bolts.
- Compatibility: Instructions apply to Twin bed frames.
- Customer Supplied Tools: Phillips head screwdriver is required for attaching slat kits.
Usage Features:
- Assembly:
- Step 1 (Foot Rail and Legs): Attach the left and right legs (2 and 3) to the foot rail (1) using JCB M6 x 110mm bolts (A) and barrel nuts (B). Tighten with the Allen wrench M4 (F).
- Step 2 (Side Rails): Attach the side rails (4) to the foot rail (1) using JCB M8 x 15mm bolts (C). Tighten with the Allen wrench M6 (E).
- Step 3 (Attaching to Headboard): Attach the assembled open bed frame to the headboard using 4 JCB M8 x 15mm bolts (C) (supplied with the headboard). Tighten with the Allen wrench M6 (E).
- Step 4 (Slat Kits): Attach the 2 slat kits (5) to the open bed frame using wood screws 1 1/4" (D). Tighten with a Phillips head screwdriver (customer supplied).
- Adult Assembly: Indicated by an icon.
Maintenance Features:
- Spare Hardware: Includes spare hardware.
- Customer Support: Contact Atlantic Furniture for damaged or defective items.
- Periodic Checks: Recommended to periodically check that all screws are tight and all parts are secure for lasting safety.
Trundle Bed
Function Description:
The Trundle Bed is a pull-out bed designed to fit under a main bed frame, providing an additional sleeping surface. It consists of a front panel, front rail, back rail, left/right/mid rails, rear blocks, and slat kits with webbing.
Important Technical Specifications:
- Parts List:
- Hardware: 1 box
- Front Panel: 1 piece
- Front Rail: 1 piece
- Back Rail: 1 piece
- Left, Right, Mid Rail: 3 pieces
- Rear Block: 2 pieces
- Slat Kit with Webbing: 2 sets
- Hardware:
- JCB M6 x 2 3/8" (60mm) (A): 4 pieces (plus 1 spare) - for attaching rear blocks to the back rail.
- JCB M6 x 1 5/8" (40mm) (B): 9 pieces (plus 1 spare) - for attaching left/right/mid rails to front/back rails.
- JCB M6 x 5/8" (15mm) (C): 6 pieces (plus 1 spare) - for fixing L brackets to the front panel and attaching the front panel to the front rail.
- Barrel nut (D): 4 pieces - for JCB M6 x 2 3/8" bolts.
- L Bracket (E): 3 pieces - for attaching rails.
- Wood screw (F): 20 pieces (plus 2 spares) - for attaching slat kits.
- Allen wrench (G): 1 piece (plus 1 spare) - for tightening M6 bolts.
- Compatibility: Twin XL.
- Customer Supplied Tools: Phillips screwdriver is required for attaching slat kits.
Usage Features:
- Assembly:
- Step 1 (Rail Assembly): Attach the left, right, and mid rails (05) to the front rail (03) using L brackets (E) and JCB M6 x 1 5/8" bolts (B). Similarly, attach the left, right, and mid rails (05) to the back rail (04) using JCB M6 x 1 5/8" bolts (B). Tighten all with the Allen wrench (G).
- Step 2 (Front Panel): Attach the front panel (02) to the front rail (03) using JCB M6 x 5/8" bolts (C). Tighten with the Allen wrench (G).
- Step 3 (Slat Kits): Lay the slat kits (07) webbing side down onto the rail assembly. Attach using wood screws (F) and tighten with a Phillips head screwdriver (customer supplied).
- Step 4 (Rear Blocks): Attach the rear blocks (06) to the back rail (04) using JCB M6 x 2 3/8" bolts (A) and barrel nuts (D). Tighten with the Allen wrench (G).
- Step 5 (Final Insertion): Insert the assembled Trundle bed under the main bed.
- Adult Assembly: Indicated by an icon.
Maintenance Features:
- Spare Hardware: Includes spare hardware.
- Customer Support: Contact Atlantic Furniture for damaged or defective items.
- Periodic Checks: Recommended to periodically check that all screws are tight and all parts are secure for lasting safety.
To Next Page
Need help?
General
