ASSEMBLY INSTRUCTIONS
Before assembling your headboard, please read through these
instructions carefully and familiarize yourself with the different parts.
PORTLAND HEADBOARD
Page 1 of 3
BACK VIEW
Step 1
Step 2
1
2
3
B
B
B
B
B
C
C
C
C
Instructions apply for bed sizes
TWIN > FULL
PARTS LIST HARDWARE
Split washer - 4 pcs
Flat washer - 4 pcs
JCB M6 X 25mm (1”) - 4 pcs
HARDWARE FOR METAL BED FRAME
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
JCB M6 X 70mm (2 3/4”) - 4 pcs
Spare - 1 pc
B
A
C
D
G
F
E
H
Allen wrench - 1pc
Spare - 1pc
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726
Barrel nut - 4 pcs
Wooden dowel - 4 pcs
Wood screw - 4 pcs
Spare - 1 pc
Spare - 1 pc
Spare - 1 pc
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
READY
ASSEMBLE
TO
If you purchased a wood headboard to attach to metal bed frame, please refer to page 3.
Attach the legs (2) and (3) to the headboard panel (1),
using JCB (B) and barrel nut (C). Tighten with the
Allen wrench (H).
1
5
5
Remove packing stick (5) from headboard panel (1) and . Insert wooden dowels (A)DISCARD
to the locator holes on spacer block (4). Attach the spacer blocks (4) to the legs (2) and (3), using
wood screws (D), as shown below. Tighten with Phillips screwdriver. (customer supplied)
4
4
4
2
3
D
D
A
HEADBOARD PANEL
1 PC
1
2
3
5
4
1 PC
1 PC
2 PCS
2 PCS
LEFT LEG
RIGHT LEG
PACKING STICK
SPACER BLOCK
PO :
Adult assembly
To Next Page
Need help?
General
