Atlantis Super - Operating Instructions; Initial Product Cleaning Procedure

IMPORTANT!
Turn power switch to the OFF position
and unplug the dispenser before performing this procedure. Dispense hot
water until temperature drops to a safe level to avoid the risk of scalding.
1. Remove the water bottle.
2. Press all dispensing buttons until water no longer comes out.
3. Place a bucket beneath the drain outlet on the back of the dispenser.
4. Remove the cap and plug from the drain valve (in hot & cold model only)
and let the water flow into the bucket.
Replace the cap and plug. A screwdriver or coin can be used to help loosen
the drain cap. Collect the water in a container, not the drip tray.
5. Replace the water bottle.
Drain the tank before and after cleaning, when
going on long vacations or if not using the
dispenser for long periods of time.
DRAINING THE TANK
Drain
outlet
Vacuum or sweep away the dust from the
condenser coils at the back of the dispenser.
For best results, you can purchase a brush
designed specifically for this purpose from your
local appliance store. This will improve cooling
and efficiency.
CLEANING THE CONDENSER
LED FUNCTION INDICATORS
Heater is in operation
The hot water has reached
its opt i m u m temperature
and is ready for dispensing
The cold water compressor
is in operation
Blue/
Green
Yellow
“ON”
“ON”
“ON”
The cold water has reached
its opt i m u m temperature and
is read for dispensing
The cold water compressor
is in operation
Power on
Red
For Hot & Cold model For Normal & Cold model
LED Status
10
11
Accessories shown may not be part of standard equipment.
Actual design, colour and specications may vary from the images shown.
BIG
PLUS
300*330*1135
375*405*1165
15.65
18.5
300*330*980
375*405*1010
13.8
16.1
No. of Faucets
Power Source
Cooling Capacity (liters per hour)
Power Cold (watts)
Refrigerant
Heating Capacity (liters per hour)
Power Hot (watts)
Condenser
Unit Dimensions (in mm)
Package Dimensions (in mm)
Net Weight (in kg)
Gross Weight (in kg)
2
3
90
500
Static
BLUE
300*330*980
375*405*1010
13.6
15.8
Floor
Standing
Cooling
Cabinet
Table
Top
2
3
130
500
Static
2
3
90
500
Static
300*330*980
375*405*1010
16.7
19
300*330*500
375*405*530
12
13.6
3
5
130
500
Static
3
5
130
500
Static
220V/1P/50Hz
R 134 a CFC Free
DESCRIPTION
MODEL
0
<_ 90 C, 5 liters/hr
FROSTY
PLUS
JUMBO PLUS
3
220V/1P/50Hz
10
150
R 134 a CFC Free
0
<_ 90 C, 5 liters/hr
500
Fan Cooled
300*330*1135
3 *405*116575
19.25
22.10
SUPER
3
220V/1P/50Hz
10
150
R 134 a CFC Free
0
<_ 90 C, 5 liters/hr
500
Fan Cooled
360*345*1145
435*420*12 01
25.45
28
DESCRIPTION
MODEL
No. of Faucets
Power Source
Cooling Capacity (liters per hour)
Power Cold (watts)
Refrigerant
Heating Capacity (liters per hour)
Power Hot (watts)
Condenser
Unit Dimensions (in mm)
Package Dimensions (in mm)
Net Weight (in kg)
Gross Weight (in kg)
300*330*535
375*405*570
12
13.75
No. of Faucets
Power Source
Cooling Capacity (liters per hour)
Power Cold (watts)
Refrigerant
Heating Capacity (liters per hour)
Power Hot (watts)
Condenser
AIRPRESS
300*330*1020
375*405*1050
14.65
17.50
Floor
Standing
Cooling
Cabinet
Table
Top
3
3
130
500
Static
3
3
90
500
Static
300*330*1020
375*405*1050
17.8
20.6
300*330*535
375*405*570
13
14.8
PRIME
Floor
Standing
Cooling
Cabinet
Table
Top
3
3
90
500
Static
3
3
130
500
Static
3
3
90
500
Static
220V/1P/50Hz
R 134 a CFC Free
Unit Dimensions (in mm)
Package Dimensions (in mm)
Net Weight (in kg)
Gross Weight (in kg)
DESCRIPTION
MODEL
0
<_ 90 C, 5 liters/hr
3
3
90
500
Static
300*330*1020
375*405*1050
16.9
19.5
300*330*1020
375*405*1050
13.75
16
TECHNICAL SPECIFICATIONS