( 3 ) Safety Instructions Governing Specific Operational Phases
Avoid any operation mode that might be unsafe.
All necessary precautions to ensure that the machine is only used being in a safe and reliable
state are to be taken. The machine is only to be operated if all protective and safety
devices, such as removable safety devices, emergency shut-off equipment, noise-protection
elements and exhausters are in right place and fully functional.
The machine is to be checked for damage and defects at least once per work shift. Any
changes including the working behaviour of the machine are to be reported to competent
persons immediately. If necessary, the machine is to be stopped and locked off immediately.
In case of any malfunction the machine is to be stopped and locked off immediately and the
defect has been eliminated.
Generally make sure that nobody is at risk before starting the machine.
Operating personnel are to be briefed before executing special operations and maintenance
work and a supervisor is to be appointed.
Always tighten unscrewed connections after maintenance and repair.
After completing maintenance and repair all safety devices removed for setting up or
repairing the machine must be refitted and checked for functionality immediately.
To minimize the enviromental impact all consumables and replaced parts must be disposed
Before starting the machine check that the accessories have been stowed away safely.
Operations that may be a risk to the stability of the machine are to be avoided.
Do not step on conveying equipment.
-6-
To Next Page
Loading...