Instruction Book
9829 2115 69 60
The screen shows the first items of a list of all settings. Use the scroll button the see the other
items in the list.
Press the Enter button (1); a red selection bar is covering the first item (Language in use). Use
the [ key of the Scroll keys to select the setting to be modified and press the Enter key.
A pop-up screen appears. Use the | or J, key to select the required parameter and press the
Enter key to confirm.
Regulation settings
Select the Regulation icon as described above and press the Enter button (2). Following
screen appears
(1) Regulation
(2) PDP extended cycle
(3) Activated
(4) PDP switching temperature
(5) PDP Alarm offset
(6) Heatless backup mode
(7) Not activated
(8) Modify
The screen shows the list of all settings.
Press the Enter button (1); a red selection bar is covering the first item (PDP extended cycle).
Use the [key of the Scroll keys to select the setting to be modified and press the Enter key.
A pop-up screen appears. Use the | or J, key to select the required parameter and press the
Enter key to confirm.
To Next Page
Loading...