Instruction Book
9829 2115 69 54
Press the Escape key on the controller to go to the main Week Timer menu. Select Remaining
Running Time from the list and press the Enter key on the controller to Modify.
(1) Week Timer
(2) Week Action Schemes
(3) Week Cycle
(4) Status
(5) Remaining Running Time
This timer is used when the week timer is set and for certain reasons the dryer must continue
working, for example, 1 hour, it can be set in this screen. This timer is prior to the Week Timer
action.
(1) Week Timer
(2) Week action schemes
(3) Remaining Running Time
To Next Page
Loading...