Need help?Do you have a question about the Atlas Copco DZS 065V and is the answer not in the manual?
General| Pumping speed | 65 m3/h |
|---|---|
| Ultimate pressure | 8.5 m |
| Head | 8.5 m |
| Power | 1.1 kW |
| Speed | 2850 rpm |
| Outlet Diameter | 50 mm |
Explanation of safety symbols used in the manual.
General guidelines for safe operation, maintenance, and repair.
Specific safety measures to follow during the installation process.
Guidelines for safe operation of the pump.
Safety measures for performing maintenance and repair tasks.
Explanation of vacuum pressure and flow rate definitions.
Overview of the DZS series dry claw vacuum and overpressure pumps.
Schematic representation of air flow through the pump.
Description of the condensate drainage system.
Detailed drawings showing pump dimensions and connection points.
Recommendations and proposals for pump installation and ventilation.
Guidance on making proper electrical connections for the pump.
Explanation of pictographs and warning symbols used on the pump.
Step-by-step guide for the initial start-up of the pump.
Procedure for starting the pump during normal operation.
Key checks and considerations while the pump is running.
Recommended procedure for safely stopping the pump.
Procedure for taking the pump out of service.
Schedule of recommended maintenance tasks and intervals.
Recommended lubricants and oil specifications for the pump.
Recommendations for storing the pump.
Guidelines for environmentally friendly disposal of used materials.
Procedures for cleaning and replacing the air filter.
Instructions for checking and topping up the gearbox oil level.
Guidance on cleaning the motor fan and ventilation openings.
Specifies reference operating conditions and performance limits.
Technical specifications and performance data for the pumps.
Electrical data and specifications for the pump motors.
Guidelines for selecting appropriate electric cables and fuses.
To Next Page