Need help?Do you have a question about the Atlas Copco G 7 and is the answer not in the manual?
General| Model | G 7 |
|---|---|
| Type | Rotary Screw Compressor |
| Free Air Delivery | 17.4 - 27.2 cfm (depending on model) |
| Weight | 250 - 275 kg (depending on model) |
| Working Pressure | 7.5 - 13 bar (depending on model) |
| Installed Motor Power | 7.5 kW |
| Motor Power | 7.5 kW |
| Drive Type | Direct Drive |
| Pressure | 7.5 bar |
| Tank Capacity | Not applicable (stationary compressor) |
| Sound Level | 65-69 dB(A) (depending on model) |
| Noise Level | 65-69 dB(A) (depending on model) |
Explains the warning symbols and their meanings used throughout the manual.
Outlines essential safety rules, personnel qualifications, and general safe working practices.
Details safety measures required for the proper installation of the compressor unit.
Provides critical safety guidelines for operating the compressor safely.
Specifies safety procedures and precautions for maintenance and repair activities.
Instructions for safely dismantling the unit and disposing of its components.
General functions of the controller for compressor management and protection.
Detailed explanation of the control panel buttons, LEDs, and their functions.
Interpretation guide for icons displayed on the controller screen.
Instructions for starting, stopping, and managing basic compressor operations.
Information on warnings indicating potential shutdown conditions like high temperature.
Details on causes and actions for compressor shutdowns due to faults or limits.
Explanation of service reminders and when maintenance is required.
Step-by-step guide for the first-time startup and preparation of the compressor.
Instructions for safely starting the compressor during normal operation.
Steps to safely shut down the compressor.
Recommended maintenance tasks, intervals, and service intervals.
Procedures for changing the compressor oil, air filter, and oil separator.
To Next Page