- 4-
Warranty and Liability Limits
Use only authorized parts.
Damages or operating defects caused by the use of non-authorized components and spare components will not be covered by the Warranty or Product Liability.
The manufacturer shall not be liable for any damages arising from modications, additions or conversions performed without its written approval.
Negligence in maintenance or changes to the machine setup may result in risk of major accidents, including the risk of res.
Despite our best eorts to ensure the accuracy of the information in this manual, Atlas Copco does not take any responsibility for eventual errors.
Any non-authorized use or copy of its contents or any part thereof is prohibited.
This is especially applicable to trademarks, model names, part number and drawings.
Our products are coated according to ISO 12944 standard; our corrosion class is “C3 medium”.
To Next Page
Loading...
