Atlas Copco QMC41-250-I06

Product Information EN QMC41-250-I06
6
© Atlas Copco Industrial Technique AB - 9839 0326 01
If no detailed information about preventive maintenance is included, follow these general guide-
lines:
■
Clean appropriate parts accurately
■
Replace any defective or worn parts
Preventive maintenance
Recommended interval between actions:
Valid at normal usage of the tool at a load up to 70% of maximum torque.
Service should only be carried out by trained technician following provided service instructions and
using original Atlas Copco spare parts.
Interval Action
1.500.000 cycles or 1 year Calibrate the tool
1.500.000 cycles Exchange bit grounding
3.000.000 cycles Exchange front part
3.000.000 cycles Exchange motor