EasyManua.ls Logo

Atlas Copco SF 1 - Belt Replacement

Atlas Copco SF 1
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjustment range
Example:
Stopping pressure: 7 bar(e) (100 psig)
Starting pressure: adjustable between 5.8 bar(e) (84 psig) and 3 bar(e) (43.5 psig)
8 bar (116 psi) units: the pressure switch is factory-adjusted to start the compressor at 6.5 bar(e) (94 psig)
and to stop at 7.75 bar(e) (112 psig).
10 bar (145 psi) units: the pressure switch is factory-adjusted to start the compressor at 8 bar(e) (116 psig)
and to stop at 9.75 bar(e) (141 psig).
6.2 Air filter
Air filter (AF)
Instruction book
2920 7110 11 31

Related product manuals